Pneumatic Cylinders


Manual Size 2520


Air Supply:

1. For increased life and better performance use an air filter and lubricator. 2. Working air pressure should be set to between 80 and 100 psi.


1. DO NOT PUT FINGERS BETWEEN JAWS! 2. The end cap can be rotated up to 180 degrees for proper orentation of blades. 3. Disconnect air supply when changing blades. 4. Do not exceed the cutting capacity of the blades. 5. Lubricate the blades 2-3 times a day for better life. 6. Operating the blade without cutting material between will shorten blade life.
Max Supply PSI
Pneumatic Actuator Image


Manual Image
#Part & # RequiredPart #Description
1Cylinder (1)P-PN-02625 CYL
2End Cap (1)P-PN-03225M CAP
3Piston (1)P-PN-02825 PIS
4Cylinder Spring (1)P-SP-026.125X1.93X4.
5Piston O-Ring (1)P-OR-008924
6End Cap O-Ring (1)P-OR-004032
7Blade Bolt (1)P-RI-067.157X1.3
8Bushing (2)P-RI-0623/8-24X.3X#21
9Nut (1)P-SS-0484MM LOCK
10Lever (1)HANDALEVER*=part of HANDA
11Trigger (1)HANDATRIGGER *
12Trigger Spring (1)P-SP-030180X.224X.025 *
13Valve (1)P-RI-071BRASS VALVE
14Valve O-Ring (1)P-OR-009901
15Valve Spring (1)P-SP-031.026X.312X1
16Roll Pin (2)P-SS-0441/8X.75 ROLL PIN *
17Hanger (1)HANGER
18Ball (1)P-RM-0565/16"
19Pipe Plug (1)P-RM-0531/4-18

Rebuild Kits (Includes piston, spring, O-rings, mounting screw and nut)

PTR-05-RK EOAT and Manual Size 05 Rebuild kit
PTR-10-RK EOAT and Manual Size 10 Rebuild kit
PTR-20-RK EOAT and Manual Size 20 Rebuild kit
PTR-30-RK EOAT and Manual Size 30 Rebuild kit
PTR-50-RK EOAT and Manual Size 50 Rebuild kit