Pneumatic Cylinders

SPT-30M

Manual Size 30

Specifications

Air Supply:

1. For increased life and better performance use an air filter and lubricator. 2. Working air pressure should be set to between 80 and 100 psi.

Operation:

1. DO NOT PUT FINGERS BETWEEN JAWS! 2. The end cap can be rotated up to 180 degrees for proper orentation of blades. 3. Disconnect air supply when changing blades. 4. Do not exceed the cutting capacity of the blades. 5. Lubricate the blades 2-3 times a day for better life. 6. Operating the blade without cutting material between will shorten blade life.

OAL (in/mm)	Bore (in/mm)	Blade (in/mm)	O.D. (in/mm)	Weight (oz/g)	Max Supply PSI
6.50/165	1.97/50	0.67/17	2.21/56	N/A	100

Parts

#	Part & # Required	Part #	Description
1	Cylinder (1)	P-PN-034	30 CYL
2	End Cap (1)	P-PN-040	30M CAP
3	Piston (1)	P-PN-036	30 PIS
4	Cylinder Spring (1)	P-SP-026	.125X1.93X4.
5	Piston O-Ring (1)	P-OR-008	924
6	End Cap O-Ring (1)	P-OR-004	032
7	Blade Bolt (1)	P-RI-068	.195X1.32
8	Bushing (2)	P-RI-061	3/8-24X.2X#8
9	Nut (1)	P-SS-049	5MM LOCK
10	Lever (1)	HANDA	LEVER*=part of HANDA
11	Trigger (1)	HANDA	TRIGGER *
12	Trigger Spring (1)	P-SP-030	180X.224X.025 *
13	Valve (1)	P-RI-071	BRASS VALVE
14	Valve O-Ring (1)	P-OR-009	901
15	Valve Spring (1)	P-SP-031	.026X.312X1
16	Roll Pin (2)	P-SS-044	1/8X.75 ROLL PIN *
17	Hanger (1)		HANGER
18	Ball (1)	P-RM-056	5/16"
19	Pipe Plug (1)	P-RM-053	1/4-18

Rebuild Kits (Includes piston, spring, O-rings, mounting screw and nut)

PTR-05-RK	EOAT and Manual Size 05 Rebuild kit
PTR-10-RK	EOAT and Manual Size 10 Rebuild kit
PTR-20-RK	EOAT and Manual Size 20 Rebuild kit
PTR-30-RK	EOAT and Manual Size 30 Rebuild kit
PTR-50-RK	EOAT and Manual Size 50 Rebuild kit